4-72C型碳鋼離心風機 4-72C型碳鋼離心風機可輸送空氣和其它不自燃的、對人體無害的、對鋼材無腐蝕性的氣體。氣體內不允許有粘性物質，所含塵土及硬質顆粒物不大于150mg/m3。氣體溫度不得超過80℃該風機廣泛適用于工礦企業、大型建筑物、賓館酒樓等室內通風換氣排煙。
產品型式:本公司號有NO2.8、3.2、3.6、4、4.5、5、5.6、6、6.3、7.1、8、10、12十三種?？芍瞥捎倚妥笮齼煞N型式，葉輪順時針旋轉，稱為右旋風機。以“右”表示，葉輪逆時針旋轉，稱為左旋風機，以“左”表示。風機的出口位置，以機殼的出風角度表示。4-72NO2.8-10出廠時均做成多種型式，可根據使用單位要求安裝成所需的位置，即出風口位置調整范圍0°~225°間隔是22.5°或45°，即（0°、45°、90°、135°、180°、225°）共六種。NO7.1-10根據用戶需求制成一種方向角度。風機的傳動方式為C式。
結構特點:本風機主要由葉輪、機殼、進風口、機架、軸承箱等皮帶傳動而組成。葉輪：由10個后傾斜的機翼型葉片、曲線型前盤和平板后盤組成。并經過動平衡校正，氣動性能，故運轉平衡、振動小、效率高、壽命長等特點。機殼：用鋼板焊成蝸型殼體。進風口：制成整體（全部模具成型），裝于風機的側面，于軸向平行的戴面未曲線形狀，能使氣體順利進入葉輪，且損失較小。傳動組：由主軸、軸承箱、聯軸器等。主軸由優質鋼制成，軸承箱整體結構，采用滾動軸承，分為水冷和油冷兩種。

4-72C Carbon steel centrifugal fan 4-72C Carbon steel centrifugal fan It can transport air and other non-flammable harmless to human body and non-corrosive gas to steel. No viscous substances are allowed in the gas and the dust and hard particles are not more than≤150mg/m3. The air temperature shall not exceed≤80℃. The fan is widely used for indoor ventilation and smoke extraction in industrial and mining enterprises large buildings hotels and restaurants.
Product type: The company has NO2.8、 3.2、 3.6、 4、 4.5、 5、 5.6、 6、 6.3、 7.1、 8、 10、 12 13kinds. Can be made into right-handed and left-handed two types the impeller rotating clockwise called right-handed fan. In & other; Right & throughout; That the impeller rotates counterclockwise called the left cyclone to “ Left & throughout; Said. The outlet position of the fan is expressed by the outlet Angle of the enclosure. 4-72NO2.8-10 are made into a variety of types when leaving the factory can be installed into the required position according to the requirements of the user that is the position of the air outlet adjustment range 0° ~ 225° Interval is 22.5° Or 45° That (0° And 45° And 90° And 135° And 180° And 225°) A total of six. No7.1-10 according to user requirements to make a direction Angle. The transmission mode of the fan is C type.
Structure features: The fan is mainly composed of impeller housing air intake frame bearing box and other belt drive. Impeller: consists of 10 rear sloped airfoil blades curved front disc and flat rear disc. And after dynamic balance correction pneumatic performance so the operation balance small vibration high efficiency long life and other characteristics. Housing: welded with steel plate into a cochlear housing. Air INLET: MADE INTO a WHOLE (all mold molding) installed on the side of the fan parallel to the axial surface without curve shape can make the gas smoothly into the impeller and the loss is small. Transmission group: spindle bearing box coupling etc. The main shaft is made of high quality steel. The overall structure of the bearing box is made of rolling bearings which are divided into water cooled and oil cooled.